Top of Page
Back to 20/20 Mould & Shutter Oil
Back to Product Guide

DATA SHEET

20/20 MOULD & SHUTTER RELEASE OIL

DESCRIPTION:

  • 20/20 oil is a re- manufactured mineral oil. It provides excellent off-shutter finishes and easy release action.

  • Coverage is typically in the region of 10 -12 sq. metres per litre.

TYPICAL APPLICATIONS:

  • Dressing of moulds and shutters (steel, fibreglass, ABS, Polypropylene). Rubber moulds should be tested by the user before proceeding with production.

TYPICAL PROPERTIES:

  • Straw-coloured and bright, slight sediment and suspended matter.

  • Refined mineral oil.

  • Flash Point: min. 130 deg. C.

  • Density @ 40 deg. C. max. 0,895 kg/litre

  • Viscosity: max. 16,5 cSt @ 40 deg. C.
  • Acidity: max. 0,03 mg KOH/g.
  • Water Content: max. 35 ppm. Typically 9.

STORAGE/HANDLING:

  • Store in a cool, clean, dry place, with adequate ventilation.

  • Wear safety glasses/face shield if splashes are likely to occur. Slight to moderate irritation may occur.

  • Fire: foam, dry agent or carbon dioxide.

 

WARRANTY
D.G.N. Manufacturing warrants that their products are of the quality represented in their product literature and are suitable for use in accordance with their recommendations. Since the products are used entirely under conditions beyond the control of D.G.N. Manufacturing, this Warranty is limited solely to the quality of their products. D.G.N. Manufacturing cannot be held responsible for consequential loss or damage. The onus is on the user to determine the suitability of the product by conducting his own trials.