Top of Page
Back to 20/20 Mould & Shutter Oil
Back to Product Guide

MATERIAL SAFETY DATA SHEET

RO/20 MOULD & SHUTTER RELEASE OIL

TYPICAL PROPERTIES:

  • Density @ 20 deg. C :kg/l 0,895

  • Flash Point Min. 140 ESK 208-1

OTHER CHARACTERISTICS:

  1. Acidity  0,03 mg KOH/g

  2. Other components (mixture) :< 1%

  3. Refined mineral oil : Balance

  4. Appearance : Straw coloured.

HSE ASPECTS   COMMENTS
EXPLOSION Prevention Avoid formation of mists or excessive heating.
Hazard May form explosive mixtures if volatilized.
     
EYES  Prevention Wear safety glasses/face shield if splashes are likely to occur.
Hazard Slight to moderate irritation.
First Aid If irritation persists, SEEK MEDICAL ATTENTION. Wash copiously with water for at least 10 minutes.
     
FIRE Prevention Store away from direct sunlight and other sources of heat.
Hazard Combustible.
First Aid OBTAIN EXPERT HELP IMMEDIATELY.
Extinguishing Foam, dry agent or carbon dioxide. DO NOT use water jet.
     
INGESTION  Prevention AVOID.
Hazard Not likely to arise during normal use.
First Aid DO NOT INDUCE VOMITTING. SEND TO HOSPITAL IMMEDIATELY. Give 250ml milk or water to drink.
     
INHALATION  Prevention AVOID.
Hazard Does not normally give rise to harmful vapours.
First Aid If dizzy or nauseous, remove casualty to fresh air. If symptoms persist, OBTAIN MEDICAL ATTENTION.
     
SKIN 

 

Prevention Wear protective clothing to minimize skin contact.
Hazard Minimally irritating. Not expected to be a skin sensitizser.
First Aid If irritation persists, OBTAIN MEDICAL ATTENTION.
     
SPILLAGE Handling Contain spillage and mop up with absorbent clay or mineral oil absorbent.
     
STORAGE Handling Store in cool, clean, dry place with adequate ventilation.
     

   

All information is given in good faith but without guarantee in respect of accuracy and no responsibility is accepted for errors or omissions or the consequences thereof.